Type: GPS300
Main information: The fatigue performance and fracture mechanics performance of metal materials and parts are tested under the condition of pulling pressure and alternating load. With a variety of special fixture, can also be used to test the fatigue life of metal materials and parts and other performance indicators.

Type: CMT5305
Main information: It is mainly used to test and analyze the mechanical properties of tensile and compression of metal and nonmetal materials. It has three closed-loop control methods: stress, strain and displacement. Can be detectthe parameters of tensile strength, compression strength, elastic modulus and fracture elongation.At thesame time, ithasthe high temperature furnace and temperature control system，cantest the mechanical properties of the material at 200-1000 ℃.

Type: Germany  Saphir 550 + Rubin530
Main information: Equipped with automatic grinding device, itcan set different time, pressure, rotation direction and grinding depth according to different samples. Can be cast 1 ~ 7 samplesonce, maximum sample size for grinding 50 mm x 70 mm.Can continuous completion of the sample rough, fine grinding and polishing.

Type: LECO TC-500
Main information: The analyzer used to determine the component of the oxygen and the nitrogen of the steel by percentage, which procedure controlled by computer terminal.

Type: Sweden ARL3460/4460 spectrum analysis system.
Main information: Mostly, using the high pure argon offering system, it is always used to analyze the percent of the composition elements about the metal material by determining the strength of the atom spectrum decomposition which from the spark source. Beside the conventional and trace elements determination, it also could be used to the quantitative determination about the N, aluminosilicophosphate and Calcium, and the analysis accuracy is ppm.